43. December 2008 - Building the elevated right level.

A Forum that is covering a build of a European HO layout at the Model Train Exchange.
Post Reply
Kevin Wilson-Smith

43. December 2008 - Building the elevated right level.

Post by Kevin Wilson-Smith »

In Part 41 Planning for the upper right elevated level was shown. This part shows the placement of the supports for the this level.

Photo 1 - Placing the supports for the upper level - testing for fit and adjusting as necessary.

Photo 2 - Continuing the process - all supports are clamped in place to check for fit first.

Photo 3 - After checking and adjustment, the supports are glued in place.

Photo 4 - Resting after a hard morning's work (I think!)!
Attachments
map.png
Photo 1 - Placing the supports for the upper level - testing for fit and adjusting as necessary.
Photo 1 - Placing the supports for the upper level - testing for fit and adjusting as necessary.
Photo 2 - Continuing the process - all supports are clamped in place to check for fit first
Photo 2 - Continuing the process - all supports are clamped in place to check for fit first
Photo 3 - After checking and adjustment, the supports are glued in place.
Photo 3 - After checking and adjustment, the supports are glued in place.
Photo 4 - Resting after a hard morning's work (I think!)!
Photo 4 - Resting after a hard morning's work (I think!)!
Post Reply

Return to “MTE Model Railway Layout Build #1 - HO European Layout.”